• CANTEK 303S SINGLE BLADE RIPSAW
  • Anti-Kickback Fingers for Safe Operation Upper and lower antikickback fingers and swinging left guard to ensure optimum operator safety.
  • Precision machined cast iron chain and track assembly Cast iron chain and track assembly are precision machined and hardened for maximum wear resistance and superior cut quality.
  • Control panel The operator controls are located at the operator's eye level. In addition to the blade and feed controls, the panel has a low oil display light which will illuminate when the oil in the lubricator reservoir is low. When it goes beyond the low limit, the saw will stop until it is refilled.
  • Electronic lubricator ensures maximum chain and track wear resistance Equipped with an electronic lubricator to automatically lubricate the chain track to ensure maximum wear resistance and a long chain & track life.
  • High-quality Schneider electrical controls High-quality Schneider electrical components are readily available in the marketplace.
  • 6 hold down rollers A total of 6 hold-down rollers ensure the workpiece is held firmly onto the feed chain during cutting operations. Proper material hold-down ensures precise straight cutting with optimum edge quality.
  • Optional laser unit 20 MW laser to project the cutting line to achieve maximum potential yield from your material. A stand is included with the machine. Laser and holder are optional.
  • CANTEK 303S SINGLE BLADE RIPSAW
  • Precision rip fence with micro-adjustment by handwheel Quick setting rip fence runs on round cylindrical guide. Fence is notched to pass over and under the table and top kickback fingers for faster change over.
  • Precision saw arbor with 12″ maximum blade size Precision-built saw arbor constructed from nickel chrome steel to ensure precision cutting without vibration.
  • CANTEK 303S SINGLE BLADE RIPSAW
  • Pressure roller adjustment (center) with mechanical digital readout and blade height adjustment handwheel (right) Convenient handwheel adjustment for the blade elevation and setting of the pressure rollers.
  • Three Feed Speed Adjustment The operator can quickly and easily change feed speeds according to the material being cut. Feed speeds can be changed from 50, 65, & 85 FPM.

    • CANTEK 303S SINGLE BLADE RIPSAW

    CANTEK

    $15,000.00
    Request A Quote
    (No reviews yet) Write a Review
    SKU:
    CANTEK 303S SINGLE BLADE RIPSAW

    Product Description

    CANTEK | 303S SINGLE BLADE RIPSAW

     

    Save time and speed up production in your ripping operations.

    The Cantek 303S single blade ripsaw is a straight line ripsaw that is the ideal ripping upgrade for those looking to prepare material for a moulder or produce face frame material. The 303S automatically feeds the material for consistent rip results. The cast-iron feed chain runs on double V guide rails and holds the material firmly for precision straight cutting. A powerful 10 HP motor with maximum 12" blade provides a cutting depth up to 3.35". A micro-adjustable infeed fence allows for quick setups to ensure precise rip widths with fast adjustments.

    Why Cantek 303S Single Blade Ripsaw?

    · Rigid machine body consists of a thick welded steel frame with an integral table fitted with a sturdy cast column.

    · Precision-built saw arbor constructed to ensure precision cutting without vibration.

    · Cast iron upper assembly & cast iron table with superior vibration damping for optimum results.

    · Micro-adjustable fence by rack and pinion for fast setups with precise results.

    · Cast iron chain and track assembly are precision machined and hardened for maximum wear resistance and superior cut quality.

    Key Advantages

    · Two rows of antikickback fingers for safe operation.

    · Swing down rear table prevents short workpieces and thin edgings from jamming in the machine.

    · An electronic chain lubricator provides consistent lubrication to the chain track for optimum wear resistance.

    · Powerful 10HP motor.

    · Three feed speeds can be externally adjusted for operator convenience.

    · Mechanical digital readout for setting the workpiece thickness.

    · 12" blade is included.

    · Optional laser light for projecting the cutting line.

     

    Cantek 303S Single Blade Ripsaw | Specifications

     

    DESCRIPTION                                                            SPECIFICATION

    Saw arbor diameter                                                             1″

    Saw blade diameter                                                        8 – 12″

    Saw arbor speed                                                           4500 RPM

    Feed speeds                                                           3 (50, 65, 85 FPM)

    Maximum workpiece thickness                                         3.35″

    Minimum workpiece length                                                 8″

    Pressure rollers 4 rows                                                  (6 rollers)

    Distance between saw and column                                  13 ¾"

    Arbor motor                                                                        10 HP

    Feed motor                                                                          1 HP

    Dust port size                                                               5″ = 600 CFM

    Table size                                                                       30″ x 50″

    Table height                                                                       31-7/8″

    Net weight                                                                       1870 Lbs

    Shipping weight                                                               2310 Lbs

    Machine dimensions                                                      61″ x 38″ x 53″

    Shipping dimensions                                                   59″ x 46″ x 59″

    Electrical requirements                                    230/3/60 = 32.2 Full Load Amps

    Product Videos

    Custom Field

    Product Reviews

    Write a Review